Bass amp 2.0 has just reached a high point. Blacksmith unites immense power and versatility achieving raw excellence. With Blacksmith on-stage power is not an issue – large clubs major venues or full-scale stadiums Blacksmith covers it all. A massive 1600 watts delivers a huge bass tone that will follow the users slightest moves while playing those hard-rocking bass lines and hammering riffs.
Blacksmith offers more than excessive power with renowned Bass amp 2.0 features such as integrated chromatic bass tuner refined tone-shaping tools including 4 bands of EQ SpectraComp per string compression TubeTone complete Tube pre- and power amp recreation and TweeterTone intelligent HF control as well as the unique 3 user-defined memories Blacksmith takes bass amplification to a new level in more than one respect. Presets Anyone using different basses or changing playing style during shows knows that a few amp presets would be welcome. Blacksmith offers 3 on-board user memories for effortless switching between 4 and 5-string basses or Rickenbackers and Fenders for that matter. Alternatively three entirely different tones for one bass can be stored – e.g. overdrive slap and a vintage tone. 8 4 or 2 ohms your choice Blacksmith is capable of handling cabinet combinations all the way down to 2 ohms so ultimately four RS410 cabinets could be fired up simultaneously – thats 16 x 10″ or 8.7 square foot of speaker cones blasting air at the bass player standing in front of the rig.. Better put that foot on the monitor to keep upright. Be prepared this will get loud! Features: Power: 1600 watts (4500 watts peak). Presets: 3 user-defined presets. On-board chromatic tuner: Always active for instant pitch monitoring at any time. SpectraCom: Multi-band compression – the musical way to compress! TubeTone: Emulation of both the tube preamp and tube power amp sections. 4-band EQ: Semi-parametric Bass Lo-Mid Hi-Mid and Treble. TweeterTone: Front panel tweeter level control for crisp and modern bass tones. Transformer balanced Line Driver: Studio-grade DI for ultra-clean signals to PAs or DAWs Further Specs: Input Section: Input connector: 1/4″ jack Input impedance: 1 MOhm / 100 pF Gain range: -96 to 32 dB Tone Controls: Bass: Default Freq: 200 Hz (range: 71-1120 Hz Gain: +15/-24 dB) – Shelving type. Low Mid: Default Freq: 400 Hz (range: 100-1600 Hz Gain: +15/-24 dB) High Mid: Default Freq: 800 Hz (range: 200-3150 Hz Gain: +15/-24 dB) Treble: Default Freq: 4000 Hz (range: 400-6300 Hz Gain: +15/-24 dB) – Shelving type. TweeterTone: -12 to 12 L-PAD Cabinet Recreation TubeTone: 0 to 12 Tube amp Recreation SpectraComp: 3 band Spectral Compression Preset Level: -12 dB to 0 gain attenuation User Memories: 3 memory locations storing all front panel controls except Mute & Master Level Tuner: Tuning range: Chromatic constant on A0 (27.50 Hz) to E5 (659.26 Hz) Other Details: Mains supply: 100-120V~ or 220-240V~ 50/60 Hz (200 W @ 1/8 Power) Speaker out: 2x Speakon Power Rating: 1600 W (4500 W Peak) 2 Ohm / >4 Ohm setting: Recessed Toggle Switch Max. Output: +0 dBu Optimal Load Impedance: 600 Ohm Preamp out: 1/4″ Jack Balanced Output Max Output Level = +8 dBu Power amp in: 1/4″ Jack balanced input impedance = 10 kOhm Max Input Level = +8 dBu Digital Recording out: Balanced XLR AES/EBU (24 Bit) Remote Connection: 5 pin DIN Cable with shield Operating/Storage Temperature: 0° C to 50° C / -30° C to 70° C Humidity: Max. 90 % non-condensing Dimensions: 483 x 412 x 178 mm / 19″ x 16.2″ x 7″ Finish: Anodized aluminum front plated and painted steel chassis TC Electronic Guitar-and-Bass EYA
More Information and order online::
TC Electronic Blacksmith 2.0 Bass Amp Head