The Shure PSM200 Wireless Monitoring System is a compact and reliable live monitoring system that lets you wireless monitor your performance through a set of comfortable SE112 in-ear headphones. With dual XLR/TRS combo jacks on the mixer the PSM200 allows you to connect microphone and line level instruments and monitor them wireless through the compact bodypack receiver which also features on board controls for volume and Hi/Lo input signals.
Wireless Monitoring System To start monitor your live performance in real time with the Shure SE112 headphones simply connect your desired audio source to the XLR/Line level connections on the front of the transmitter and set the transmission frequency to match with the receiver. Then plug in the SE112 headphones and use the on board controls on the bodypack to fine tweak until you are happy with the volume level. Shure SE112 Headphones The Shure SE112 headphones are a premium set of in-ear headphones which incorporate a sound cancelling design to reduce unwanted noise from the surrounding environment making them perfect for live performance. Additionally the soft silicone buds adapt to suit a range of ear sizes providing a comfortable and secure fit. Features Robust and Reliable Wireless Monitoring System Built-In Headphone and Audio Limiter Front Mounted Antenna 2 x Mic/Line Input Channels for Mix Control Up to 100m Operating Distance Volume Control on Bodypack Receiver Rack Mountable (1/2 Rack Space) High Performance SE112 In-Ear Headphones Selectable Frequency Bandwidth (600-630 MHz) Specifications General Transmitter Inputs: 2 x XLR / 6.3mm Jack Combo (Mic/Line Level) Transmitter Output: 2 x XLR Split Outputs Frequency Response: 30 Hz – 12 kHz Transmitting Frequency: 518-865 MHz (Selectable) RF Output Power: 10 – 30 mW Operating Distance: Up to 100m Harmonic Distortion: 1.5 S/N Ratio: 80 dB (A) Listening Mode: Mono Compatible Systems (Per Band): 4 Wired Body Pack Option: Yes Personal Mix Control: On Transmitter Remoteable Transmitter: No Battery Life (Wired): 6 Hours Battery Life (Wireless): 4 Hours EP2T TransMixer Modulation Limiter: Internal Peak Limiter (>10:1 Hard Knee Compression) Antenna: 1/4 Wavelength Semi-Rigid PCB Mount Connector Type: XLR / 1/4″ Jack Combo Nominal Input Level: – 25 dBu (50 Volume) Maximum Input Level: – 5 dBu (50 Volume) Current (Max): 170 mA Height: 8.6″ Width: 5.6″ Depth: 1.7″ Weight: 370g P2R Receiver RF Sensitivity: 109 dBm Squelch Threshold: 102 dBm Antenna: Attached Whip Audio Input Connector: 1/4″ Jack (Mono) Impedance: 1 M Ohm Input Level (Max): LO – 0 dBu / HI – 10 dBu Frequency Response: 30 Hz to 20 kHz (Earphone Dependent) Power Requirements: 9 V Battery Audio Output Connector: 1/8″ Jack Minimum Load Impedance: 8 Ohms Height: 4.809″ Width: 2.875″ Depth: 1.251″ Weight: 100g SE112 Earphones Earphone Type: In-ear Frequency Response: 25 Hz – 17.5 kHz Sensitivity: 108 dB (1 kHz) Impedance: 16 Ohms Input Connector: 3.5mm Finish: Grey Cable Length: 127 cm Shure PA-DJ-and-Lighting 19FN
More Information and order online::
Shure PSM200 Wireless In Ear Monitor System with SE112 Earphones