Rode NT6 Studio Condenser Microphone

Rode NT6 Studio Condenser Microphone
Compact 1/2″ Condenser Microphone with Detachable Capsule (head). The RODE NT6 condenser microphone is specifically designed for difficult mounting applications. Although clearly relevant to instrument micing the new NT6 is extremely well suited to any situation where a small unobtrusive but powerful microphone system is required.

The RØDE NT6 is specifically designed for difficult mounting applications. Although clearly relevant to instrument miking the new NT6 is extremely well suited to any situation where a small unobtrusive but powerful microphone system is required. The 1/2″ (externally biased) gold sputtered capsule is designed to attach to a custom made multi-position swivel mount allowing it to be independently positioned with ease. The capsule is connected to the remote pre-amplifier (body) by a custom 3m Kevlar® fibre reinforced cable. The surface-mount pre-amplifier circuit also incorporates a two position variable pad: 0 dB an -10 dB attenuation and a 2-position variable high-pass filter that enables you to step from a flat response to 80Hz high pass filter; both conveniently located away from the capsule providing additional control without the need to move the capsule once in position. Reviews “I have to say that this is another accomplished offering from the Australian manufacturer… sonically its hard to find fault with this microphone. The combination of diminutive design smarts reliability and sonic integrity will no doubt see this microphone become a popular choice in a wide variety of roles.” Audio Technology “This microphone has plenty of top-end airiness but it doesnt sound at all harsh. Whats more it goes very deep… The NT6 retains its even and neutral response throughout the frequency range.” MusicTech Magazine Features/Specifications Externally biased condenser Gold sputtered 1/2″ capsule Two position PAD – 0dB and -10dB Two position High-Pass Filter – flat and 80Hz Convenient two-axis swivel mount and 3m Kevlar® fibre reinforced cable included Heavy-duty satin-nickel plated body Surface mount circuitry Low noise and full frequency response Power: P48 (48V) P24 (24V) phantom supply Acoustic Principle: Pressure gradient Directional Pattern: Cardioid Frequency range: 40Hz-20kHz selectable HPF @ 80Hz/12dB/octave Output impedance: 200 ohm Signal noise ratio: 75 dB SPL (A – weighted per IEC651) Equivalent noise: 19 dB SPL (A – weighted per IEC651) Maximum SPL: 135dB SPL (@ 1kHz 1 THD into 1K ohm load) (145dB with maximum PAD) Maximum output voltage: +6dBu (@ 1kHz 1 THD into 1K ohm load) Sensitivity -37 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/- 2 dB @ 1kHz Weight: 600gm Rode Recording-and-Computers 76P

More Information and order online::
Rode NT6 Studio Condenser Microphone


Also take a look on these products: