The KW152 Active PA Speaker is a multi-purpose loudspeaker that represents the next evolution in wood enclosure loudspeakers. Incorporating all the groundbreaking electronic attributes of the K Series the KW152 offers 1000W of Class D power as well as maximum clarity and speaker efficiency. Enjoy more headroom less distortion and a reduced chance of feedback with a 15″ woofer 1.75 diaphragm compression driver and maximum SPL of 133 dB peak. The KW152 has an attractive and professional appearance with the rugged texture-painted birch enclosure with tour-grade 16 gauge steel grilles. The speakers in the KW series are easy to transport between venues thanks to their lightweight design and comfortable ergonomic handles.
High Output Like K Series each of the four KW Series models features a QSC designed 1000 watt (2 x 500 W continuous) Class D power module. And continuing in the K Series tradition every model is fitted with the identical high-output 1.75″ HF device (full-range models) and woofers of the same high quality design regardless of speaker size. Defined Coverage Area Directivity Matched Transition (DMT™) provides for matched LF and HF coverage across the entire listening area eliminating unnatural “dead” or “hot” frequency zones. Connectivity KW Series features a four-position mic / line gain switch that allows for connection of a wide variety of devices. Combo XLR and 1/4″ TRS inputs accept both mic and line level input while a set of RCA phono inputs (except KW181) allow additional connectivity to portable MP3 players CD players and line-level mixers. Up to three audio sources can be mixed internally and summed to a balanced output for “daisy-chaining” of multiple units. Separate direct outputs are also provided on each channel for additional output flexibility. Control On-board switches provide preset EQ settings. The HF setting (full-range models) can be set to VOCAL BOOST for additional presence in the critical mid-frequency area or FLAT for accurate reproduction of the incoming signal. The LF switch can be set to NORM DEEP™ for additional bass extension or EXT SUB (full-range models) for use with an external subwoofer. The rear panel LED switch can be set to POWER illuminating the front-mounted LED when the unit is powered on OFF for applications where it is not desirable to illuminate the front LED or LIMIT which indicates to the system operator that the clip limiter circuit has been engaged during operation. Tilt-Direct™ The KW122 and KW152 feature a unique Tilt-Direct™ pole cup mounting system. A simple turn of the dial engages a 7.5 degree downward tilt of the speaker allowing acoustic energy to be kept on the audience and off reflective surfaces for applications where maximum coverage from a high-positioned speaker is desired. Remote Gain Remote gain control capability is offered via a potentiometer (not included) connected to the on-board Phoenix-Style connector. In an installed application multiple KW Series speakers can be “daisy-chained” for total gain control from a single remote pot. Auto-standby mode is engaged after 5 minutes of inactivity. Premium-Grade Materials KW Series is designed to withstand the rigors of professional use. Advanced construction processes premium-grade Baltic birch cabinetry ergonomic cast aluminium handles low-noise casters (KW181) and a highly protective steel grille provide for ease of transport and long term durability. Integrated M10 suspension points allow for flown applications with a KW M10 KIT (sold separately) and a threaded pole receptacle (KW181) provides for a positive wobble free connection to a threaded speaker pole (included). Features 15″ Woofer; 1.75″ diaphragm compression driver 60° Nominal coverage angle Maximum SPL 133 dB peak Also functions as monitor floor wedge 1000-watt Class D power modules in all models (2 x 500 W continuous) Onboard mixer with two combo XLR and 1/4″ inputs and stereo RCA inputs (three audio input sources); two direct channel outputs and single summed balanced output Extensive DSP featuring DEEP™ and Intrinsic Correction™ enhances system performance DMT™ (Directivity Matched Transition) ensures uniform coverage across the entire sound field Rugged texture-painted birch enclosures Four-position Mic/Line gain (full-range models) Tour-grade 16 gauge steel grilles Comfortable ergonomic handles 35 mm pole sockets with Tilt-Direct™ M10 rigging points for suspended installation Extensive DSP enhances system performance DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area eliminating unnatural “dead” or “hot” frequency zones. Intrinsic Correction™ first featured in our high-end line-array products maps 65-75 spatially-averaged measurements to IIR and FIR filters that actively adjust time frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field. DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies. GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping. Specifications: Configuration: 15″ 2-way multipurpose Transducers: 15″ cone transducer 1.75″ diaphragm compression driver Frequency Response (-6 dB): 47Hz – 18kHz Frequency Range (-10 dB): 44Hz – 20kHz Nominal Coverage (-6 dB): 60° axisymmetric Maximum SPL: 133 dB peak Power Output: 1000W Class D (500W LF 500W HF) continuous 2000W peak Controls: Power Gain A Gain B Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB) LF Mode (Ext Sub/Norm/DEEP™) HF Mode (Flat/Vocal Boost) Front LED (On/Off/Limit) Indicators: Power Signal A Signal B Standby Limit Mic (24 dB and 36 dB settings) Connectors: Balanced female XLR/ 1/4″ line/mic level input Balanced female XLR/ 1/4″ line level input Dual Balanced male XLR full range line level out Balanced male XLR “mix” out Stereo RCA line level input Remote gain control Locking IEC power connector Cooling: On demand 50 mm variable speed fan Amplifier Protection: Thermal limiting output overcurrent overtemperature muting GuardRail™ Transducer Protection: Thermal limiting excursion limiting AC Power Input: Universal power supply 100-240 VAC 50 to 60 Hz AC Power Consumption (1/8 Power): 100 VAC 2.3 A 120 VAC 2.01 A 230 VAC 1.13 A Input Impedance: Channel A (0dB gain): 38kΩ balanced 19kΩ unbalanced Channel A (+12dB gain): 10kΩ balanced 5kΩ unbalanced Channel A (+24dB gain): 2.66kΩ balanced 1.33kΩ unbalanced Channel A (+36dB gain: 660Ω balanced 330Ω unbalanced Channel B XLR/ 1/4″ 38kΩ balanced 19kΩ unbalanced Channel B RCA: 10kΩ Enclosure: Material: 15mm painted birch plywood Finish: Black textured paint Grille: Black powder coated 16 gauge steel Dimensions: 32.1″ x 17.5″ x 15.2″ / 816 mm x 445 mm x 386 mm QSC PA-DJ-and-Lighting GBI
More Information and order online::
QSC KW152 Active PA Speaker 1000 Watt