The M-Audio BX Carbon active monitor arrives on the scene with the most accurate imaging ever offered by the BX line as well as an updated modern look. The BX Carbon offers serious sound mixing capabilities all in a new compact and sleek design.
Professional Monitoring for the Home Studio The BX6 Carbon studio monitor helps you track monitor and mix with confidence by providing accurate sound and dynamic acoustic control. Equipped with a 6″ woven Kevlar low-frequency driver and 1.25″ natural silk dome tweeter the BX6 Carbon delivers a flat frequency response enhanced stereo imaging and increased clarity for authentic mixing in a space-saving design. The bi-amplified 100 Watt Class A/B amplification means high power with less noise and ensures that your monitoring setup can handle todays modern music with ease. With the BX6 Carbon your music is ready for any listening environment. Sweeter Sweet Spot The tweeters waveguide has been enhanced to provide an expansive sweet spot and superior stereo imaging. A wider mix position gives you professional monitoring for any caliber studio. Pinhole-mounted LED placement cues help locate and light up the sweet spot to ensure a speaker placement that reliably translates stereo information and frequencies. When the LEDs turn bright you know youre dead center and ready to start mixing your sessions or laying down tracks with the BX6 Carbon. Acoustic Control Mixing doesnt occur in a vacuum. Your listening environment influences your mixing decisions and ultimately the sound of your music. The BX6 Carbons Acoustic Space Control a series of calibration switches helps provide optimal acoustic conditions for tracking mixing and monitoring anywhere. Adapt the BX6 Carbon to any mixing environment-from bedrooms to basements to professional studios-without compromising frequency detail or stereo image. The result is a flexible monitoring setup for the most demanding mixing environments. Specifications Type: 2-way near-field studio reference monitors LF Driver: 6-inch (153mm) Kevlar curved cone with high temperature voice coil and damped rubber surround. Magnetically shielded. HF Driver: 1.25-inch (32mm) magnetically shielded natural silk dome Frequency Response: 45 Hz – 22 kHz Crossover Frequency: 2.5 kHz LF Amplifier Power: 60 W HF Amplifier Power: 40 W Signal-to-Noise Ratio: 100 dB typical A-weighted Input Connectors: 1 x XLR balanced input connector 1 x TRS balanced/unbalanced input connector Polarity: Positive signal at + input produce outward LF cone displacement Input Impedance: 20 Kohm balanced 10 Kohm unbalanced Input Sensitivity: 85 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum Protection: RF interference output current limiting over temperature turn on/off transient subsonic filter external mains fuse. Indicator: Power on/off indicator on rear panel Power Requirements: Factory-programmed for 115 V 50/60 Hz 230 V 50/60 Hz or 100 V 50/60 Hz Cabinet: Vinyl-laminated high-acoustic-efficiency MDF Dimension (height x width x depth): 12.5″x 8.4″ x 9.8″ (318mm x 213mm x 249mm) Weight (without packing): 16 lbs 7.5 kg M-Audio Recording-and-Computers XD6
More Information and order online::
M-Audio BX6 Carbon Active Studio Monitor Single