The JBL PRX712 12″ PA Speaker Bundle features two JBL PRX712 active PA loudspeakers. The PRX700 Series represent an evolutionary step in the efficient use of amplifier power rugged durability and enhanced versatility in a self-powered loudspeaker designed to perform in the real world of sound reinforcement. They are the first systems to use our patented Differential Drive technology with ferrite drivers featuring high power wide bandwidth and low distortion. PRX700 speakers are set up for a lifetime of performance you can trust. This bundle includes: 2 x JBL PRX712 active PA speakers 1 x pair of speaker stands and 2 x 6m XLR cables.
The PRX712 is a compact and versatile speaker in the PRX700 Series. It has been designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA. Two user selectable EQ settings are provided to optimize the system for either application. With a dual socket pole mount the PRX712 is a perfect match with a PRX718XLF subwoofer offering a high performance self-powered sub/sat system. The PRX712 is comprised of a 12″ Differential Drive woofer a 2408H-1 37.5 mm (1.5 in) annular polymer diaphragm neodymium compression driver mounted to a 90° by 50° horn all driven by 1500 watt Class-D digital power amplifier. Sophisticated DSP is at the core of a fully featured input section providing user selectable system EQ protection input sensitivity selection cross-over functionality dynamic limiting and discrete component optimization. All PRX700 cabinets are built from a combination of 25mm (on the top and bottom for added rigidity) and 18mm strong light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX700 Series cabinets are protected by JBLs tour proven DuraFlex finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each. The amplifier input panel offers XLR or 1/4 inch jack compatibility and a sensitivity switch provides extra flexibility making it possible to connect literally any sound source without using a mixer. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob. Features 135 dB peak SPL 12″ Differential Drive low-frequency driver for low-distortion and higher SPL 1.5″ diameter next generation JBL neodymium compression driver JBL designed waveguide for accurate coverage Efficient Class-D amplifier technology Optimized EQ for monitor or front-of-house applications DSP input section crossover dynamic limiting component optimization selectable system EQ Line level and direct microphone input capability Professional XLR-1/4″ combination inputs RCA inputs and XLR loop-through Multi-angle enclosure for main PA or floor monitor applications Integrated 36 mm pole mount socket Integrated handle with injection molded backing cup for easy transport Integrated M10 suspension points for easy setup Lightweight poplar plywood cabinets made structurally sound with tongue and groove joints and protected by JBLs tour proven DuraFlex finish. Cloth backed dent-resistant 16 gauge steel grilles Specifications Power Rating : 1500 W Frequency Range (-10 dB) : Main: 44.8 Hz – 19.6 kHz Monitor: 44.8 Hz – 19.5 kHz Frequency Response (±3 dB) : Main: 55.7 Hz – 18.2 kHz Monitor: 56.5 Hz – 17.7 kHz Coverage Pattern : 90° x 50° nominal Directivity Index (DI) : 10.2 dB Directivity Factor (Q) : 10.4 Crossover Frequency : 1.8 kHz Maximum SPL : 135 dB Signal Indicators : Limit: Yellow LED indicates peak output has been reached and dsp limiter is acting Signal : Green LED indicates signal present Power/Standby : Blue indicates system has power and ready to pass audio Red indicates system has power but is in a power saving mode and will not pass audio. Dynamic Control (Input) : dbx Type IV? limiter circuit Input Impedance : 20K Ohms (balanced) 10K Ohms (unbalanced) LF Driver : 1 x JBL 272G 305mm (12 in) woofer HF Driver : 1 x JBL 2408H-2 37.5 mm (1.5 in) annular polymer diaphragm neodymium compression driver Enclosure : Asymmetrical 18 mm plywood Suspension / Mounting : Dual 36 mm pole socket 12 x M10 Suspension Points Transport : 1 x integrated handle with injection molded backing cup Finish : Obsidian DuraFlex finish Grille : Powder coated Obsidian 16 gauge perforated steel with acoustical transparent black cloth backing. Input Connectors : 2 x Balanced XLR / 1/4 inch input 2 x unbalanced RCA input Output Connectors : 1 male XLR balanced output Dimensions (H x W x D) : 612.394 mm x 384.556 mm x 341.376 mm (24.11 in x 15.14 in x 13.44 in) Net Weight : 19.4 kg (36 lb) JBL PA-DJ-and-Lighting VKN
More Information and order online::
JBL PRX712 12″ PA Speaker Bundle Including Stands