The JBL LSR4328 Pak is a bi-amplified Studio Monitor System armed with an 8″ Woofer 1″ Tweeter and DSP Room Mode Calibration. It has extremely accurate reproduction and allows powerful monitor control from your computer. With flexible front-panel speaker and system control it is ideal for surround use producing a precise image no matter where each speaker is placed.
The JBL LSR4328P is a robust (32.5 lbs.) biamplified 2-way studio monitor speaker housed in a rigid modern cabinet with a dark graphite finish and a carefully damped and baffled interior. The 8″ Neodymium woofer and Waveguide-controlled 1″ silk dome tweeter are powered by 150 and 70 Watt amplifiers respectively. Supremely accurate reproduction The LSR4328P incorporates JBLs Linear Spatial Reference Technology matching the exact geometry of the 4300s waveguide design with its transducers and crossover network to optimize the frequency response at the mix position. JBLs next generation RMC Room Mode Correction system incorporates a powerful analyzer into each speaker that automatically analyzes and compensates for problems caused by low frequency standing waves and proximity to boundaries. Simply plug the LSR4300 calibration microphone into the speaker and push a button to accomplish any of this. Powerful monitor control from your computer The LSR4328P has a powerful DSP platform providing full system networking and communication. The Comprehensive LSR4300 Control Center Software enables total control of all system parameters directly from the workstation desktop. High resolution digital and analog inputs are featured plus a virtual monitor section with input switching master volume mute and solo controls enhance functionality of the entire system and provide comprehensive control at the mix position. The LSR4328P is the first professional studio monitor with automatic room compensation centralized system control and user-friendly simplicity. Flexible front-panel speaker and system control Control of System Level Individual Speaker SOLO Input Source Selection high and low frequency EQ settings and adjustment of all parameters can be made from each speakers front panel with the systems infrared remote control or with LSR4300 Control Center Software. The LSR4328P incorporates the new Harman Hiqnet protocol enabling a coordinated calibration of all speakers intelligent configuration of surround sound systems and synchronized control of all speakers in the system. Ideal for surround use The LSR4328P is designed for any application from simple stereo mixing to complex surround production. The system can be configured with up to eight main speakers in any desired mix of 6″ LSR4326P and 8″ LSR4328P models. The system is automatically aligned so the sound arriving at the mix position from all speakers is synchronized producing a precise image regardless of each speakers actual physical placement. Features Magnetically shielded bi-amplified nearfield monitors for project or commercial recording and mixing Advanced Linear Spatial Reference design for flat off-axis response and greater clarity at the mix position RMC(TM) Room Mode Correction provides electronic control of room modes “tunes” speaker to acoustic characteristics of recording and mixing space HiQnet(TM) Network Protocol enables multi-speaker multi-room system-wide control of level EQ input selection and other general speaker functions Wireless Remote control and LSR4300 Control Center software enables remote control from listening position 31-segment dBFS front panel LED meter and setting display with -70dBFS to 0dBFS scale plus CLIP 5 rear panel LED indicators for active input and digital stream selection Integrated 150-watt LF 70-watt HF speaker-matched bi-amplification with factory calibrated sensitivities 1″ silk dome tweeter with Elliptical Oblate Spheroidal waveguide for precise pattern control 8″ woofer with efficient Neodymium magnet and 2″ voice coil 24-bit/96kHz digital inputs and processing with AES and SPDIF Digital I/Os Balanced XLR and 1/4″ TRS Analog inputs Magnetically shielded for close-proximity use with computer and video monitors Reinforced enclosure and mounting points for installation integral handles for simplified positioning Specifications Design Type: Ported Low Frequency Response (Hz): 35 High Frequency Response (Hz): 32000 Max SPL (dB): 112 Nearfield: Yes Midfield: No Full Range: No Woofer Size (in): 8 Tweeter Size (in): 1 Power RMS (Watts): 220 Crossover (x-way): 2 Volume Control: Front XLR Input: Yes RCA Input: No TRS Input: Yes Digital Input: Yes Equaliser: Yes JBL Recording-and-Computers TNX
More Information and order online::
JBL LSR4328 PAK Bi-Amplified Studio Monitor System