The added subwoofers extend the dynamic range to beef up the low end. Although it is able to cover rooms holding up to 200 people this system is remarkably compact. Its discreet look keeps things inconspicuous.
Applications: Suitable for small top mid size venue performances with audiences up to 200 people Package Comprises: 4x E 435 Mid-/High Unit 2x EA 600 Amplification 2x E 110 Passive Bass 2x E 110 A Active Bass 2x EP 1 Mounting Pole 2x EF 45 Foot HK Audio Elements Top Mid/High Cabinet The mid / high unit 435 is equipped with four specially equipped for ELEMENTS developed 3.5 “high-performance loudspeakers. The arrangement of these four speakers in a vertical line is a very even distribution of the volume and frequency of the image on the loudspeaker will be public space achieved. A column system can contain up to four mid / high units that are connected via e-Connect quickly and reliably. E435 Features/Specifications: Scalability mid / high unit with line array technology homogeneous and focused coverage Durable aluminum housing E-Connect signal connection E435 Further Specs: Rated power (RMS): 150 W RMS Frequency response: -10 dB 140 Hz – 20 kHz about integirerten active filter system Nominal impedance: 16 ohms Sensitivity: 1W / 1m 97 dB all measurements in Half-Space E-Connect connectors: 1x in 1x E-Connect out Speakers: 4 x 3.5 “full range speaker Directivity: 70° horizontal Crossover frequency: 140 Hz 12 dB / oct Dimensions (WxHxD): 11 x 38 x 12 cm * 15 * x 4-7/16 x 4-3/4 ” Please Note: 4x E435s are included in this package HK Audio Elements Digital Power Amp – 600W The EA 600 amp unit is built in the same case design as the mid / high unit E 435th The output power is 600 watts at 4 ohms. With this system amp you can choose to supply up to two subwoofers E 110 Sub or a passive subwoofer with a maximum of two mid / high units E 435 or a column with a maximum of four mid / high units. The ventilation of the amplifier module is provided via front panel. A switch can be connected depending on the number of E 435 a special equalization choose to optimize the frequency response for each line length. EA600 Features/Specifications: Power amplifier with 600 watt Class D Power Connecting max.vier mid / high units or max. one or two subwoofers subwoofer with max. two tops 4 filter system (selectable depending on the number of connected lines in a mid high units) E-Connect signal connection EA600 Further Specs: Continuous Power per channel: @ 4 ohms 600 watts @ 4 ohms Class D (EIA) Active protection circuits: RMS limiter Input Sensitivity: +4 dBu / -10 dBu (switchable) DC: protection impedance thermal Cooling: fan temperature controlled Connectors: In combination jack connectors XLR Out 1x Parallel Speakon Out. 1x E-Connect out Dimensions (WxHxD): 11 x 38 x 12 cm Filter Type: subsonic filter system filters 4-fold depending on the number of connected mid-high units Please Note: 2x EA600s are included in this package HK Audio Elements 10″ Passive Sub For applications with even more pronouncement this passive sub bass is the perfect complement. Can be used in combination with the E 110 Sub A or the amp module EA 600th It also includes an e-Connect for recording heads and amp modules. E110S Features/Specifications: Passive Subwoofer System ideal for bass region Very compact and efficient 1x E-Connect Systemflansch with integrated signal connection Lightweight E110S Further Specs: Rated Power (RMS): 250 W / 10 Ohms Frequency Response: -10 dB 45 Hz – 150 Hz via active crossover system Speakon connectors: 1x In 1x Speakon Out 1x E-Connect out Bass Speaker: 1x 10 ” 1x top hat flange (E-Connect) Dimensions: (WxHxD) 30 x 48 x 46 cm x 18-7/8 x 18-1/8 – 11-13/16 ” Please Note: 2x E110Ss are included in this package HK Audio Elements 10″ Active Sub The handy 10 “subwoofer delivers a precise and deep bass foundation. It is equipped with a 600-watt Class D amplifier that can power up to two additional heads or another passive sub. Equipped with two e-Connect recordings is the sub either standing or lying on the floor as the basis for other elements. For convenient transportation makes the top-side handle. E110SA Features/Specifications: Very compact and efficient Parallel connection of max. two E 435 mid / high units and a passive subwoofer 2 filter system (selectable depending on the number of connected lines in a mid / high units) 2x E-Connect Systemflansch with integrated signal connection E110SA Further Specs: Frequency Response: -10 dB 45 Hz – 150 Hz via active crossover system Subwoofer Amplifier 1x 600 W / D @ 4 ohms Class Active protection circuits: RMS limiter subsonic filter filter system 2-fold depending on the number of connected mid-high units Connectors: 1x XLR Combi In 1x Out XLR XLR parallel Out. 2x E-Connect out Bass Speaker: 1x 10 ” Dimensions (WxHxD) 30 x 48 x 46 cm x 18-7/8 x 18-1/8 – 11-13/16 ” Please Note: 2x E110SAs are included in this package HK Audio Elements Pole Mount With the e-Connect-distance rod EP 1 it is possible to adjust one or more mid / high units at a certain height on the stand or the EF 45-amp system EA 600th. The spacer bars are up to a length of 1.60 m (EP 2 = 60.5 cm) – infinitely adjustable and is fixed by a screw cap to the desired height. The ingenious Elements design means speakers need only be mounted to this stand and the EF45 (available separately) base in order to have uncluttered connection (cable free) With HK Audios E-Connect a unique new type of integrated coupler/bus you can configure your Elements rig far more easily and quickly than conventional systems. Just a few minutes are all it takes to set up an Elements system. Simply snap the components together automatically linking them via E-Connect plug in your signal source and let the show begin. EP1 Features/Specifications: Anodized aluminum with large locking screw Height adjustable from 95-160 cm (EP 2 = 40 to 60.5 cm) Integrated e-connect signal connection very low weight (0.8 kg = EP 1) Please Note: 2x EP1s are included in this package HK Audio Elements System Base Using the ELEMENTS EF 45-base the power amplifier module and the mid/high unit can be plugged-in in order to have clutter free speaker connections. The double-sided integrated NL4 connectors are used for recording and transmission of the audio signal to additional speakers. With multiple speaker/sub woofer combinations the EF45 is an essential element of HK Audios groundbreaking ELEMENTS Series. EF45 Features/Specifications: Anodized aluminum with large locking screw Height adjustable from 95-160 cm (EP 2 = 40 to 60.5 cm) Integrated e-connect signal connection very low weight (0.8 kg = EP 1) Please Note: 2x EF45s are included in this package Important: Additional connectors will be required. HK Audio PA-DJ-and-Lighting IF8
More Information and order online::
HK Audio Elements Band Two Pack