Markbass Standard 104HF-4 Bass Speaker Cab 4 Ohms

Markbass Standard 104HF-4 Bass Speaker Cab 4 Ohms
The Markbass Standard 104HF features 4 x 10″ speakers and provides 800W of power at 8 ohms. The Standard 104HF is one of the lightest 4 x 10 cabs on the market at an astoundingly light 29.9 kg it can be carried with ease when loading into a venue. This cab is designed to enhance and perfectly compliment any head in the Markbass range. The 104HF is best suited to medium and large sized venues that can make full use of its 800W output.

Specifications Impedance: 4 ohms Speaker Size: 4 x 10″ Bass Port: Front Tweeter: 1″ compression driver with custom horn Power Handling: 800W RMS (AES Standard) Crossover Frequency: 3.5 kHz Frequency Response: 35 Hz to 20 kHz Sensitivity: 103 dB SPL Weight: 65.92 lbs / 29.9 kg Width: 23.39 in. / 59.4 cm Height: 29.13 in. / 73.9 cm Depth: 18.9 in. / 48 cm Please Note: This is the 4 ohm version of this cab it is also available with an impedance of 8 ohms. Mark Bass Guitar-and-Bass 1AJD

More Information and order online::
Markbass Standard 104HF-4 Bass Speaker Cab 4 Ohms



Markbass Little Mark 500w Tube Bass Amp Head

Markbass Little Mark 500w Tube Bass Amp Head
The Little Mark Tube gives the warmth and richness of a tube preamp or the clean attack of a solid state preamp… or a mix of both!

On the front panel there are two inputs with separate gain controls: one 1/4″ jack and one combo jack that accepts either an XLR or a 1/4″ cable. Additional features include switchable 48V phantom power for the XLR input solid-state/tube mix control four bands of EQ VLE and VPF filters line out level control pre-post EQ switch for the XLR out (on rearpanel) and mute control (push-pull on the master knob). Inputs Input 1: impedance 500 Kohm max. voltage 15 Vpp Input 2 (Balanced XLR/1/4″ combo): balanced impedance 500 Kohm max. voltage 15 Vpp phantom power 48V Effect Return: impedance 33 Kohm max. voltage 10 Vpp Controls Gain 1: -60 dB to +23 dB range Gain 2: -60 dB to +23 dB range Mix: mixes tube and solid state gain Master Volume: Line Out Level Ground Lift: switch on rear panel Pre/Post EQ: switch on rear panel Mute: push/pull on master knob Equalisation Low: center frequency: 60 Hz; level: ±16 dB Low Mid: center frequency: 360 Hz level: ±16 dB High Mid: center frequency: 800 Hz level: ±16 dB High: center frequency: 5 kHz level: ±16 dB VPF (Variable Pre-shape Filter): center frequency 380 Hz (cut) VLE (Vintage Loudspeaker Emulator): frequency range 250 Hz-20 kHz (cut) Output Line Out: balanced XLR max. voltage 20 Vpp Effect Send: unbalanced max. voltage 20 Vpp (pre-EQ) Tuner Out: unbalanced max. voltage 2 Vpp Speaker Out: speakon/1/4″ combo 1/4″ Other Weight: 6.55 lbs / 2.97 kg Output Power: 300W RMS @ 8 ohm 500W RMS @ 4 ohm Mark Bass Guitar-and-Bass AXL

More Information and order online::
Markbass Little Mark 500w Tube Bass Amp Head

Markbass Big Bang 500W Bass Amp Head

Markbass Big Bang 500W Bass Amp Head
The Markbass Big Bang 500W bass amp head is an extremely compact lightweight amplifier smaller even than Markbass groundbreaking Little Mark heads. Despite the small size it is packed with features including aux in headphone out with level control and mute and VLE and VPF filters with footswitch control.

Other features include 4-band EQ effects loop and level control and pre/post EQ switch for the XLR DI output. Features/Specifications: Inputs: Input: Impedance 500KOhm Max Voltage 15 Vpp Aux In Effect Return: Impedance 33KOhm Max Voltage 10 Vpp Controls: Gain Master Volume Line Out Level Headphone Level Control Ground Lift (switch on rear panel) Pre/Post EQ (switch on rear panel) Mute (footswitch) Equalisation: Low: Centre Frequency: 40Hz Level: ±16dB Low Mid: Centre Frequency: 360Hz Level: ±16dB High Mid: Centre Frequency: 800Hz Level: ±16dB High: Centre Frequency: 10kHz Level: ±16dB Filter Section (with Footswitch): VPF (Variable Pre-shape Filter) Centre Frequency: 380Hz (cut) VLE (Vintage Loudspeaker Emulator) Frequency Range: 250Hz – 20kHz (cut) Output: Line Out: Balanced XLR Max Voltage 20 Vpp Effect Send: Unbalanced Max Voltage 20 Vpp (pre-EQ) Tuner Out: Unbalanced Max Voltage 2 Vpp Speaker Out: Speakon / 1/4″ combo 1/4″ Headphone Out Mark Bass Guitar-and-Bass OH0

More Information and order online::
Markbass Big Bang 500W Bass Amp Head

Markbass CMD 121H Bass Combo Amp 1 x 12″

Markbass CMD 121H Bass Combo Amp 1 x 12
This combo delivers incredible professional quality sound in a compact package. On its own or combined with other speaker cabinets the 121 combo is a versatile unit that suits many playing styles. Designed for players who need power portability and top performance!

SPEAKER: 1×12″ TWEETER: 1″ compression driver with custom horn BASS REFLEX: rear IMPEDANCE: 8 ohms SPEAKER POWER HANDLING: 400W RMS (AES Standard) AMP OUTPUT POWER: 500W @ 4 ohm / 300W @ 8 ohm PREAMP: solid state FREQUENCY RESPONSE: 45 Hz to 20 kHz CROSSOVER FREQUENCY: 3.5 kHz SENSITIVITY: 99 dB SPL WEIGHT: 39.5 lbs / 17.9 kg HEIGHT: 23.6 in. / 59.9 cm WIDTH: 15.3 in. / 38.3 cm DEPTH: 18.3 in. / 46.4 cm Mark Bass Guitar-and-Bass AF3

More Information and order online::
Markbass CMD 121H Bass Combo Amp 1 x 12″


Markbass Standard 151HR Black Line Bass Cabinet 1 x 15″

Markbass Standard 151HR Black Line Bass Cabinet 1 x 15
The Standard 151HR Black Line 1 x 15″ cab will never leave you lacking in the bottom end department. offers a deep classic sound that suits many musical styles it is the practical solution for those who like the sound of 15″ speakers its sound is clear and definite with a great bottom end and it can be used on its own matched with the Little Mark 250 Black Line head for a smart and inexpensive rig perfect for small/medium gigs.

Features/Specifications Impedance: 8 ohms Speaker Size: 1×15 in. Bass Port: rear Tweeter: 1″ compression driver with custom horn Power Handling: 200W RMS (AES Standard) Crossover Frequency: 3.5 kHz Frequency Response: 45 Hz to 20 kHz Sensitivity: 101 dB SPL Weight: 54.67 lbs / 24.8 kg Width: 23.4 in. / 59.4 cm Height: 23.8 in. / 60.4 cm Depth: 18.9 in. / 48 cm Mark Bass Guitar-and-Bass T1H

More Information and order online::
Markbass Standard 151HR Black Line Bass Cabinet 1 x 15″

Markbass Standard 104HR Black Line Bass Cabinet

Markbass Standard 104HR Black Line Bass Cabinet
If youre looking for an affordable bass cab with high power handling and great sound this Markbass 4×10″ is a smart choice.

The 104HR is an exceptional bass cabinet with 500 watts of power handling and high quality performance. The rear-ported cab offers controlled bottom end and super-focused sound which is ideal for detailed or melodic playing styles. The Standard 104HR works great on its own or can be added to the Standard 151HR Black Line or another 8ohm cab to create a stack. You can also match the 104HR Black Line with the Little Mark 250 Black Line bass amp head or any other you prefer! Features/Specifications Spanker Size: 4 x 10″ Tweeter: 1″ compression driver with custom horn Cab PowerHandling (AES Standard): 500w RMS Crossover Frequency: 3.5 Khz Frequency Response: 45 Hz to 20Khz Sensitivity DB SPL:102 Impedance: 8ohms Weight: 67.46kg 30.6 lbs Width: 23.4 in / 59.4 cm Height: 23.8 in / 60.4 cm Depth: 18.9 in / 48 cm Mark Bass Guitar-and-Bass T1G

More Information and order online::
Markbass Standard 104HR Black Line Bass Cabinet

Mark Bass Nano 300 Bass Amp Head

Mark Bass Nano 300 Bass Amp Head
The Mark Bass Nano 300 Bass Amp Head might be the smallest amp the company produce but the sound is anything other than small. Despite weighing just 1.45 kilograms the Nano Mark 300 packs a staggering 300 Watts of power making it a good choice for anyone who needs a reliable great sounding amp head that wont take up too much room. With 4 band EQ gain and master channels the Nano Mark 300 proves itself to be a versatile and powerful amp head without the bulk.

Markbass is renowned for honest clear tone that compliments a range of musical styles. This distinct tone comes thanks to the Mark Propriety Technology (MPT). This amplifying technology is suited to the variety of note pitches that bass guitars produce. This means you get a bass guitar and amp that work with each other not around each other. The Nano Mark 300 utilises this to full effect producing a solid tone from easy controls. Specifications Weight: 1.45KG Width: 20cm Depth: 21cm Height: 5.3cm Output Power: 300W RMS Equalisation: Low Low Mid High Mid High Inputs: 1 Outputs: Line Out Effect Send Tuner Out Speaker Out Controls: Gain Master Volume Ground Lift Pre/Post EQ Mark Bass Guitar-and-Bass 1EUN

More Information and order online::
Mark Bass Nano 300 Bass Amp Head

Markbass Little Mark 800 Bass Amp Head

Markbass Little Mark 800 Bass Amp Head
The Markbass Little Mark 800 Bass Amp Head is an extremely powerful compact and versatile digital solid state bass amplifier head that produces beautifully warm lows and defined crisp high tones no matter the volume. With an 800 watt output the Little Mark 800 is ideal for a range of applications from small venue gigs to a festival stage and comes complete with all the connections and EQ parameters needed to produce an reliable and fantastic tone no matter the scenario.

The Little Mark 800 is packed full of unique and innovative features that demonstrate the high quality and careful designing that goes into every Markbass amplifier such as the jack and XLR input which provides the adaptability to be used with double bass microphones or pickups as well as traditional bass guitars whilst the DI output located on the back of the unit incorporates a pre/post EQ switch providing optimized control over tone prior to being connected to a mixing desk or recording interface. Integrating both a Vintage Loudspeaker Emulator (VLE) and a Variable Preshape Filter (VPF) you have the capability to vastly manipulate and influence the tone by using the VPF to adjust the frequency curve boosting bass and middle whilst the VLE emulates traditional loudspeaker cabinets producing a whole new array of tonal options. Features/Specifications Controls Master Volume Line Out Level Gain: -60 dB to +23 dB range Ground Lift: Switch on rear panel Pre/Post EQ: Switch on rear panel Input Input: Impedance 500 Kohm max. voltage 15 Vpp Balanced Input (XLR): Impedance 100 Khom max. voltage 25 Vpp Effect Return: Impedance 33 Kohm max. voltage 10 Vpp Equalization Low Center Frequency: 40 Hz; level: ±16 dB Low Mid Center Frequency: 360 Hz level: ±16 dB High Mid Center Frequency: 800 Hz level: ±16 dB High Center Frequency: 10 kHz level: ±16 dB VPF (Variable Pre-shape Filter): Center frequency 380 Hz (cut) VLE (Vintage Loudspeaker Emulator): Frequency range 250 Hz-20 kHz (cut) Output Output Power: 500W RMS @ 8 ohm 800W RMS @ 4 ohm Line Out: Balanced XLR max. voltage 20 Vpp Effect Send: Unbalanced max. voltage 20 Vpp (pre-EQ) Tuner Out: Unbalanced max. voltage 2 Vpp Speaker Out: Speakon/1/4″ combo 1/4″ Weight & Dimensions Weight: 6.15 lbs / 2.79 kg Height: 2.8 in. / 7.1 cm Width: 10.87 in. / 27.6 cm Depth: 10.1 in. / 25.6 cm (Minimum ohm load for all Markbass heads is 4 ohms.) Mark Bass Guitar-and-Bass 12B3

More Information and order online::
Markbass Little Mark 800 Bass Amp Head

Markbass Traveler 102P Bass Cabinet 8 Ohm

Markbass Traveler 102P Bass Cabinet 8 Ohm
The Markbass Traveler 102P is one of the smallest and lightest 2X10 bass extension cabinets on the market. The Markbass Traveler 102P can be used in either vertical or horizontal position. Perfect for club gigs this cab provides a punchy full range sound.

Winner of the “Best Bass Cabinet” MIPA Award the Markbass Traveler 102P is an impressive bass cabinet with 400W power handling. Like all Markbass cabinets the Traveler 102P contains ultra-light neodymium speakers. This is the the 8 Ohm version of the cabinet. Features/Specifications Impedance: 8 ohms Speaker Size: 2×10 in. Bass Port: rear Tweeter: piezo Power Handling: 400W RMS (AES Standard) Crossover Frequency: 3.5 kHz Frequency Response: 45 Hz to 18 kHz Sensitivity: 101 dB SPL Weight: 33 lbs / 15 kg Width: 23.4 in. / 59.4 cm Height: 13 in. / 33 cm Depth: 17 in. / 43.3 cm Mark Bass Guitar-and-Bass ADX

More Information and order online::
Markbass Traveler 102P Bass Cabinet 8 Ohm

Markbass Basskeeper Bass Guitar Strap

Markbass Basskeeper Bass Guitar Strap
This handy accessory allows you to safely store your bass against the side of your amp. Strong velcro straps attach the neck of your bass to either the cabinet handle or side of cabinet.

Can be either attached to the cabinet handle (as above) or velcroed directly onto the side of the cab (see photo at right). Mark Bass Guitar-and-Bass BGU

More Information and order online::
Markbass Basskeeper Bass Guitar Strap

Markbass Mini CMD 151P Bass Combo Amp 1 x 15″

Markbass Mini CMD 151P Bass Combo Amp 1 x 15
Fifteen inch speakers used to sound big and dumb – lacking definition. But Markbasss 15s custom made by B&C like all their speakers will change the way you think about speaker sizes. Optimized especially to work perfectly with the amp circuitry.

Specifications SPEAKER: 1×15″ TWEETER: piezo BASS REFLEX: rear IMPEDANCE: 8 ohms SPEAKER POWER HANDLING: 400W RMS (AES Standard) AMP OUTPUT POWER: 500W @ 4 ohm / 300W @ 8 ohm PREAMP: solid state FREQUENCY RESPONSE: 40 Hz to 18 kHz CROSSOVER FREQUENCY: 3.5 kHz SENSITIVITY: 100 dB SPL WEIGHT: 40.79 lbs / 18.5 kg HEIGHT: 18.27 in. / 46.4 cm WIDTH: 18.27 in. / 46.4 cm DEPTH: 18.9 in. / 48 cm Mark Bass Guitar-and-Bass AEM

More Information and order online::
Markbass Mini CMD 151P Bass Combo Amp 1 x 15″

Markbass Traveler 102P Bass Cabinet 4 Ohm – Nearly New

Markbass Traveler 102P Bass Cabinet 4 Ohm - Nearly New
Perfect for club gigs this cab provides a punchy full range sound.Please note this item was returned unwanted from a customer. The original boxing is scuffed and all the seals are broken. Otherwise the unit itself looks and operates as new and has only been used a couple of times.This is a great opportunity to buy a fully functioning product at a discounted price supplied with a one year warranty.Software bundled with the original new product may have been registered or may no longer be included.

The Markbass Traveler 102P is the smallest and lightest 400W 2X10 bass extension cabinet on the market. The Markbass Traveler 102P can be used in either vertical or horizontal position. Winner of the Best Bass Cabinet MIPA Award 2011 Features and Specifications Impedance: 4 ohms Speaker Size: 2″ x 10″ Bass Port: Rear Tweeter: Piezo Power Handling: 400W RMS (AES Standard) Crossover Frequency: 3.5 kHz Frequency Response: 45 Hz to 18 kHz Sensitivity: 101 dB SPL Weight: 15 kg Width: 59.4 cm Height: 33 cm Depth: 43.3 cm Nearly New Product Please ntoe that this item is being sold as a nearly new product. This instrument has been returned as unwanted from a customer under our 28 money back guarantee. While the outer box may have some scuffs the product itself is as new. This is a great opportunity to purchase a fully working product for a fraction of the price. Mark Bass Guitar-and-Bass 14JX

More Information and order online::
Markbass Traveler 102P Bass Cabinet 4 Ohm – Nearly New

Markbass Little Mark III Bass Amp Head

Markbass Little Mark III Bass Amp Head
The incredible international success of the Little Mark II has inspired this new updated and upgraded version! Includes our new bi-band limiter which provides incredibly dynamic response and faster gutsier attack than traditional limiters. The new DI output features a pre-post EQ switch and output level control so you can optimize the signal you send to the mixer or recording unit. All this with the same compact size and weight of its famous predecessor!

Specifications INPUTS INPUT: impedance 500 Kohm max. voltage 15 Vpp BALANCED INPUT (XLR): impedance 100 Khom max. voltage 25 Vpp EFFECT RETURN: impedance 33 Kohm max. voltage 10 Vpp CONTROLS GAIN: -60 dB to +23 dB range MASTER VOLUME: LINE OUT LEVEL GROUND LIFT: switch on rear panel PRE/POST EQ: switch on rear panel EQUALIZATION LOW: center frequency: 60 Hz; level: ±16 dB LOW MID: center frequency: 360 Hz level: ±16 dB HIGH MID: center frequency: 800 Hz level: ±16 dB HIGH: center frequency: 5 kHz level: ±16 dB VPF (Variable Pre-shape Filter): center frequency 380 Hz (cut) VLE (Vintage Loudspeaker Emulator): frequency range 250 Hz-20 kHz (cut) OUTPUT LINE OUT: balanced XLR max. voltage 20 Vpp EFFECT SEND: unbalanced max. voltage 20 Vpp (pre-EQ) TUNER OUT: unbalanced max. voltage 2 Vpp SPEAKER OUT: speakon/1/4″ combo 1/4″ OTHER WEIGHT: 6.39 lbs / 2.9 kg OUTPUT POWER: 300W RMS @ 8 ohm 500W RMS @ 4 ohm Mark Bass Guitar-and-Bass AXK

More Information and order online::
Markbass Little Mark III Bass Amp Head

Little Mark 250 Black Line Bundle with Cab

Little Mark 250 Black Line Bundle with Cab
This great bundle for bass players includes a compact Markbass 250 W Little Mark Black Line amp head and a lightweight Markbass Traveler 102P cabinet along with a 1m Speakon and 6m Jack instrument cable. Perfect for the gigging bassist.

Included in this bundle: Markbass Little Mark 250 Black Line Amp Head Markbass Traveler 102P Bass Cabinet 1m Speakon Cable 6m Jack Instrument Cable Little Mark 250 Black Line Amp Head The Little Mark 250 Black Line is a smart inexpensive choice for those who dont need the full power of a 500 W head. A 250 W solid-state preamp with analog power. Great for practising rehearsing and small gigs. The Black Line version of the Little Mark 250 offers bass players the same features as the standard Little Mark 250. Made from the same cutting-edge technology and high-quality components the Black Line products achieve the same high standards as all Markbass gear. Markbass Traveler 102P The Markbass Traveler 102P is the smallest and lightest 400W 2X10 bass extension cabinet on the market. The Markbass Traveler 102P can be used in either vertical or horizontal position. Perfect for club gigs this cab provides a punchy full range sound. Also includes… This bundle also includes a 1m professional loudspeaker cable and a 6m heavy-duty noiseless instrument cable so you can get your rig up and running right away. Little Mark 250 Black Line Amp Features and Specifications Inputs Input: Impedance 500 K Ohm max voltage 15 VPP Balanced Input (XLR): Impedance 100 K Ohm max voltage 25 VPP Effect Return: Impedance 22 K Ohm max voltage 25 VPP Controls Gain: -80 dB to +23 dB range Master Volume Ground Lift: Switch on rear panel Equalization Low: Centre frequency: 40 Hz Level: +/- 16 dB Low Mid: Centre frequency: 360 Hz Level: +/- 16 dB High Mid: Centre frequency: 800 Hz Level: +/- 16 dB High: Centre frequency: 10 kHz Level: +/- 16 dB VPF (Variable Pre-Shape Filter): Centre frequency: 380 Hz (cut) VLE (Vintage Loudspeaker Emulator): Frequency Range 250 Hz – 20 kHz (cut) Output Line out: Balanced XLR max voltage 10 VPP Effect send: unbalanced max voltage 20 VPP Tuner out: unbalanced max voltage 25 VPP Speaker out: Speakon 1/4″ Other Weight: 2.6 kg Depth: 25.6 cm Width: 27.6 cm Height: 7.1 cm Output power: 150 W RMS @ 8 ohm 250 W RMS@ 4 ohm Power Requirement: 100/120V 230V 240V 50/60 Hz (according to region of sale Markbass Traveler 102P Bass Cabinet Features and Specifications Impedance: 4 ohms Speaker Size: 2″ x 10″ Bass Port: Rear Tweeter: Piezo Power Handling: 400W RMS (AES Standard) Crossover Frequency: 3.5 kHz Frequency Response: 45 Hz to 18 kHz Sensitivity: 101 dB SPL Weight: 15 kg Width: 59.4 cm Height: 33 cm Depth: 43.3 cm Also Included Speakon Cable: 1m 7.1mm OD two cores of 30 x 0.17mm copper wire Jack Cable: 6m 1/4″ jack plugs 7mm thickness Mark Bass Guitar-and-Bass PY5

More Information and order online::
Little Mark 250 Black Line Bundle with Cab

Markbass Riverbero Guitar Reverb Pedal

Markbass Riverbero Guitar Reverb Pedal
RIVERBERO offers natural-sounding reverb that can be fine-tuned with pre-delay and decay controls. The stereo presets include spring plate and room reverbs all identified on the display and modifiable in real-time. But the USB connection allows you to modify the parameters on your computer using the supplied Markbass software and then store your favourite settings in the pedal to have at your disposal whenever you need them! Like all our pedals this unit features true bypass circuitry.

CONTROLS DECAY PRE DELAY LEVEL DOWN and UP switches (scroll through presets) TRUE BYPASS (effect on/off) REAR PANEL INPUT jack LEFT/MONO OUTPUT jack RIGHT OUTPUT jack USB control (link to PC) POWER jack (DC 12V) Mark Bass Guitar-and-Bass AXQ

More Information and order online::
Markbass Riverbero Guitar Reverb Pedal