Adam S3X-V Active Near/Midfield Studio Monitor Single

Adam S3X-V Active Near/Midfield Studio Monitor Single
The Adam S3X-V Studio Monitor features Adams proprietary X-ART tweeter combined with a 9 woofer and 4.5 midrange speaker two PWM amplifiers and an A/B amplifier. Perfectly designed for longer listening distances whilst still providing well-balanced and supremely detailed sound; the S3X-V monitors deliver an impressive maximum SPL of over 124dB per pair and come equipped with extensive controls that include tweeter gain and high/low shelf EQ.

S3X-V Studio Monitor A step up over the smaller models the S3X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio the S3X-V reveals even the finest nuances of any material. The driver assembly of the S3X-V allows long non-fatiguing listening sessions. Powerful Amplifiers and HexaCone Woofers The high-performance PWM amplifiers drive the woofers and midrange in all SX series monitors while a specially developed low-noise 50W amplifier with a flat frequency response up to 300kHz drives the X-ART tweeter. The cones in SX monitors are made from HexaCone an aramid-plastic core with honeycomb structured coated with Kevlar on both sides. This construction ensures maximum strength whilst remaining lightweight this results in a superior dynamic response with self-resonances of the diaphragm eliminated from the audible range. By combining HexaCone woofers with an X-ART tweeter and PWM amplifiers these monitors deliver an outstanding dynamic performance and high sound pressure levels with sonic benefits in the treble range. Extensive Controls The front panel features several controls that are perfect for adapting your monitor setup for any application. The input sensitivity can be adjusted by two controls one changes the coarse settings (-20dB to +8dB) while the second can be used for fine tuning in 0.5dB steps ranging from -1.5dB to +2.0dB. Both the high and low shelf fitlers provide the ability to raise or lower ±4dB progressively within their frequency band. The front panel is also equipped with tweeter gain controls and two LEDs that indicate clipping status. Specifications Frequency Response: 32Hz – 50kHz Maximum SPL @ 1m: >124dB Crossover Frequency: 350Hz / 2800Hz Woofer Size: 9 / 228mm Woofer Voice Coil: 2 / 50mm Midrange Size: 4.5 / 116mm Midrange Voice Coil: 1 / 25mm Midrange & Woofer Cone Material: HexaCone Tweeter Type: X-ART Tweeter Diaphragm: 4² / 2420mm² Woofer Amplifier: PWM Power RMS / Music: 250W / 350W Mid-Range Amplifier: PWM Power RMS / Music: 250W / 350W Tweeter Amplifier: A/B Power RMS / Music: 50W / 100W High Shelf EQ >6 kHz: ± 4dB (1dB Steps) Low Shelf EQ < 150 kHz: ± 4dB (1dB Steps) EQ 80Hz: 0 to +6dB (1dB Steps) Tweeter Gain: ± 2dB (0.5dB Steps) Input Sensitivity (Coarse): -20dB - +8dB (4dB Steps) Input Sensitivity (Fine): -1.5dB - +2dB (0.5dB Steps) Input Connectors: XLR Input Impedance: 10 KOhm Magnetically Shielded: No Dimensions (H x W x D): 19 x 11 x 11.5 / 485mm x 281mm x 295mm Weight: 15.4kg / 34lb Adam Recording-and-Computers ASS

More Information and order online::
Adam S3X-V Active Near/Midfield Studio Monitor Single

Over a million songs
and hundreds of playlists.
Listen ad-free anywhere
at anytime
Join for free now!




Adam A7X Active Studio Monitors Pair with Sub 7 Subwoofer

Adam A7X Active Studio Monitors Pair with Sub 7 Subwoofer
The Adam A7X Studio Monitors feature Adams proprietary X-ART tweeter paired with a 7 mid-range woofer an A/B amplifier and a powerful PWM amplifier. Perfectly designed for home studios and smaller professional studio environments; the A7X monitors deliver a maximum SPL of 114dB per pair and come equipped with a tweeter gain function dual front-firing bass ports as well as high shelf/low shelf EQ and flexible input connectors. The A7X boasts the ability to exactly reproduce every sonic detail no matter how small with precise but powerful bass responses as well as uncompressed highs and upper mids. This bundle includes a pair of Adam A7X monitors and a Adam Sub 7 Pro Subwoofer.

Sophisticated Design The AX series monitor cabinets feature chamfered upper corners on the front helping to minimise edge diffraction so that phase cancellation is not an issue. The interior of the cabinet is equipped with a special fleece that prevents the internal resonances being disturbed as well as ensuring superior bass reflex tuning. The front panel houses the power switch volume control and front-firing bass reflex ports providing greater ease of use and allowing the monitor to be placed closer to a wall if needed. The woofers on all AX series monitors are built using a construction of woven carbon and glass fiber with the synthetic material Rohacell. When these three materials are combined together the result is an ultra-lightweight yet extremely rigid material that provides excellent transient responses. A/B and PWM Amplifiers All models in the AX series feature two discrete amplifiers – an A/B that drives the X-ART tweeter and functions quickly within its broad frequency range whilst the mid-range woofer is driven by a powerful and highly efficient pulse-width modulated (PWM) amplifier. By pairing these two together Adam delivers monitors that do not require additional heat sinks and are both more reliable and durable than traditional amplifiers. Stereolink The Stereolink is a useful feature when working on desktop DAWs. The two additional input and output jacks for the second stereo channel allow you to control the volume for both monitors using the control of only one monitor. Unlike the typical master-slave configuration each A7X is fully equipped and can function either as a master or a slave unit. Sub 7 Pro Subwoofer The Adam Sub 7 Subwoofer combines exceptional bass responses with precision and clarity resulting in absolute accuracy and an authentic natural sound. Designed to complement smaller monitors such as those from the AX series this subwoofer is equipped with both balanced (XLR) and unbalanced (RCA) input and output connectors as well as extensive control options that provide you with the ability to adapt your setup to different room acoustics and requirements. Adam subwoofers feature a level control (-60dB to +6dB) a phase switch (180°) and a variable upper frequency control. The 85Hz high pass filter allows you to relieve the monitors of the lower frequencies and meets the Dolby® recommendations for true theater sound. The Sub 7 is also equipped with a low cutoff frequency of 32Hz enabling this subwoofer to reproduce even the lowest frequencies with accuracy and realism. Specifications AX7 Active Studio Monitor Frequency Response: 42Hz – 50kHz Maximum SPL @ 1m: >114dB (Per Pair) Crossover Frequency: 2500Hz Mid-Woofer Size: 7 / 175mm Mid-Woofer Voice Coil: 1.5 / 38mm Mid-Woofer Cone Material: Carbon/Rohacell/Glass Fiber Tweeter Type: X-ART Tweeter Diaphragm Area: 4 ² / 2420mm ² Mid-Woofer Amplifier: PWM Power RMS / Music: 100W / 150W Tweeter Amplifier: Class A/B Power RMS / Music: 50W / 75W High Shelf EQ > 5 kHz: ±6 dB Low Shelf EQ < 300 kHz: ±6 dB Tweeter Gain: ±4 dB Input Connectors: XLR / RCA Input Impedance: 30 KOhm Magnetically Shielded: No Dimensions (H x W x D): 13.5 x 8 x 11 / 337mm x 201mm x 280mm Sub 7 Pro Subwoofer Frequency Response: 32Hz - 150Hz Maximum SPL @ 1m: >107dB Crossover Frequency: 50Hz – 150Hz Subwoofer Size: 7 / 178mm Subwoofer Voice Coil: 1.5 / 38mm Subwoofer Cone Material: Paper Amplifier Power RMS / Music: 140W / 210W Input Connectors: XLR / RCA Input Impedance: 10 KOhm Weight: 17.6lb / 8kg Dimensions (H x W x D): 14.5 x 8 x 11 / 370mm x 200mm x 280mm Adam Recording-and-Computers 1C0X

More Information and order online::
Adam A7X Active Studio Monitors Pair with Sub 7 Subwoofer

Adam A3X Active Studio Monitor Single

Adam A3X Active Studio Monitor Single
The Adam A3X Studio Monitor is designed for studio environments with limited space whilst still easily meeting professional requirements. The A3X is driven by two Class A/B amplifiers that provide a deep rich bass response and accurate sound reproduction especially in the critical areas between 200Hz and 400Hz with a maximum SPL of 106dB per pair. The A3X is equipped with extensive controls including a tweeter gain control as well as XLR and RCA connectors.

AX Series by Adam The AX series provides you with monitors that are perfect for a wide range of applications. These monitors are equipped with a front-firing bass reflex port for improved responses and easily accessible controls on the front panel for greater ease of use. The handmade X-ART tweeter delivers precise transient responses and the capability of reproducing the finest sonic details. Stereolink Stereolink is a useful feature when working on desktop DAWs. The two additional input and output jacks for the second stereo channel allow you to control the volume for both monitors using the control of only one monitor. Unlike the typical master-slave configuration each A3X is fully equipped and can function either as a master or a slave unit. Specifications Mid-Woofer Size: 4.5 / 120mm Mid-Woofer Cone Material: Carbon Fiber Mid-Woofer Voice Coil: 1 / 25mm Tweeter Type: X-ART Tweeter Diaphragm Area: 4&#178 / 2420mm² Amplifier Type: Class A/B Amplifier Power RMS: 50W Frequency Response: 60 Hz – 50 kHz Max SPL @ 1m: >106 dB Crossover Frequency: 2800 Hz Input Connectors: XLR / RCA Input Impedance: 10 KOhm Magnetically Shielded: No Dimensions (Height x Width x Depth): 10 x 6 x 7.5 / 252mm x 150mm x 185mm Weight: 10.1lb / 4.6kg Adam Recording-and-Computers MZ5

More Information and order online::
Adam A3X Active Studio Monitor Single

Adam S4X-V Active Midfield Studio Monitors with Stands (Pair)

Adam S4X-V Active Midfield Studio Monitors with Stands (Pair)
The Adam S4X-V Studio Monitor features Adams proprietary X-ART tweeter combined with a 12 woofer and 6 midrange speaker two PWM amplifiers and an A/B amplifier. Perfectly designed for medium-sized studios with longer listening distances whilst still providing well-balanced and supremely detailed sound; the S4X-V monitors deliver an impressive maximum SPL of over 128dB per pair and come equipped with extensive controls that include tweeter gain and high/low shelf EQ. This bundle includes a pair of Adam S4X-V professional nearfield studio monitors and a pair of Gear4music deluxe monitor stands.

S4X-V Studio Monitor A step up over the smaller models the S4X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio the S4X-V reveals even the finest nuances of any material. The driver assembly of the S4X-V allows long non-fatiguing listening sessions. Powerful Amplifiers and HexaCone Woofers The high-performance PWM amplifiers drive the woofers and midrange in all SX series monitors while a specially developed low-noise 50W amplifier with a flat frequency response up to 300kHz drives the X-ART tweeter. The cones in SX monitors are made from HexaCone an aramid-plastic core with honeycomb structured coated with Kevlar on both sides. This construction ensures maximum strength whilst remaining lightweight this results in a superior dynamic response with self-resonances of the diaphragm eliminated from the audible range. By combining HexaCone woofers with an X-ART tweeter and PWM amplifiers these monitors deliver an outstanding dynamic performance and high sound pressure levels with sonic benefits in the treble range. Extensive Controls The front panel features several controls that are perfect for adapting your monitor setup for any application. The input sensitivity can be adjusted by two controls one changes the coarse settings (-20dB to +8dB) while the second can be used for fine tuning in 0.5dB steps ranging from -1.5dB to +2.0dB. Both the high and low shelf fitlers provide the ability to raise or lower ±4dB progressively within their frequency band. The front panel is also equipped with tweeter gain controls and two LEDs that indicate clipping status. Specifications Frequency Response: 28Hz – 50kHz Maximum SPL @ 1m: >128dB Crossover Frequency: 280Hz / 2800Hz Woofer Size: 12 / 310mm Woofer Voice Coil: 3 / 75mm Midrange Size: 6 / 156mm Midrange Voice Coil: 1.5 / 37mm Midrange & Woofer Cone Material: HexaCone Tweeter Type: X-ART Tweeter Diaphragm: 4² / 2420mm² Woofer Amplifier: PWM Power RMS / Music: 500W / 700W Mid-Range Amplifier: PWM Power RMS / Music: 250W / 350W Tweeter Amplifier: A/B Power RMS / Music: 50W / 100W High Shelf EQ >6 kHz: ± 4dB (1dB Steps) Low Shelf EQ < 150 kHz: ± 4dB (1dB Steps) EQ 80Hz: 0 to +6dB (1dB Steps) Tweeter Gain: ± 2dB (0.5dB Steps) Input Sensitivity (Coarse): -20dB - +8dB (4dB Steps) Input Sensitivity (Fine): -1.5dB - +2dB (0.5dB Steps) Input Connectors: XLR Input Impedance: 10 KOhm Magnetically Shielded: No Dimensions (H x W x D): 27 x 14 x 17.5 / 690mm x 360mm x 445mm Weight: 35.6kg / 78.5lb Adam Recording-and-Computers 1BYY

More Information and order online::
Adam S4X-V Active Midfield Studio Monitors with Stands (Pair)


Adam D/A Converter for SX Series

Adam D/A Converter for SX Series
The Adam D/A Converter allows you to connect and work directly from digital sources on Adam SX series speakers. With a simple installation XLR and S/PDIF connectivity world clock connection and 5 step analog attenuator the Adam D/A Converter is the perfect digital to audio converter for your Adam SX series monitors.

Features Digital to Analog Signal Converter for SX Series Speakers AES and SPDIF to Analog Signal World Clock Connectivity Includes 5 Step Analog Attenuator Specifications Inputs: 1 x XLR 1 x S/PDIF 1 x TOSLINK Input Formats: AES/EBU (AES3) SPDIF TOSLINK Outputs: 1 x XLR Supported Sampling Rates: 32 44.1 48 88.2 96 176.4 192 kHz Supported Bit Depth: 16 – 24 bit THD + N: < -104 dB S/N Ratio: > 114 dB Operating Temperature: 0° – 40° Adam Recording-and-Computers 1C35

More Information and order online::
Adam D/A Converter for SX Series

Adam Desktop Monitor Stands (Pair) Black

Adam Desktop Monitor Stands (Pair) Black
The Adam Desktop Monitor Stands are a pair of stands suitable for desktop use designed to enhance the acoustic qualities of these models: F5 A3X A5X ARTist 3 and ARTist 5. The stands feature a non-slip rubber coating on both the set-up area and underneath to ensure your speakers maintain a strong grip. These stands align the tweeter to ear level and minimise direct desk surface reflections which helps to minimise unwanted refracted audio and optimises the sound quality. Available in both black or white to match your monitors these desktop stands are an ideal addition to any studio set-up.

Adam Recording-and-Computers 1E9A

More Information and order online::
Adam Desktop Monitor Stands (Pair) Black

Adam A5X Active Studio Monitor Single

Adam A5X Active Studio Monitor Single
The Adam A5X Studio Monitor features Adams proprietary X-ART tweeter paired with a 5.5 mid-range woofer an A/B amplifier and a powerful PWM amplifier. Perfectly designed for home and small studio environments; the A5X monitors deliver a maximum SPL of 110dB per pair and comes equipped with a tweeter gain function dual front-firing bass ports as well as high shelf/low shelf EQ and flexible input connectors. Boasting crystal-clear and crisp sound reproduction with deep bass responses the qualities of the A5X provide you with a clear picture of the smallest changes in your mix and the sonic results.

Sophisticated Design The AX series monitor cabinets feature chamfered upper corners on the front helping to minimise edge diffraction so that phase cancellation is not an issue. The interior of the cabinet is equipped with a special fleece that prevents the internal resonances being disturbed as well as ensuring superior bass reflex tuning. The front panel houses the power switch volume control and front-firing bass reflex ports providing greater ease of use and allowing the monitor to be placed closer to a wall if needed. The woofers on all AX series monitors are built using a construction of woven carbon and glass fiber with the synthetic material Rohacell. When these three materials are combined together the result is an ultra-lightweight yet extremely rigid material that provides excellent transient responses. A/B and PWM Amplifiers All models in the AX series feature two discrete amplifiers – an A/B that drives the X-ART tweeter and functions quickly within its broad frequency range whilst the mid-range woofer is driven by a powerful and highly efficient pulse-width modulated (PWM) amplifier. By pairing these two together Adam delivers monitors that do not require additional heat sinks and are both more reliable and durable than traditional amplifiers. Stereolink The Stereolink is a useful feature when working on desktop DAWs. The two additional input and output jacks for the second stereo channel allow you to control the volume for both monitors using the control of only one monitor. Unlike the typical master-slave configuration each A5X is fully equipped and can function either as a master or a slave unit. Specifications Frequency Response: 50Hz – 50kHz Maximum SPL @ 1m: >110dB (Per Pair) Crossover Frequency: 2500Hz Mid-Woofer Size: 5.5 / 145mm Mid-Woofer Voice Coil: 1.5 / 32mm Mid-Woofer Cone Material: Carbon/Rohacell/Glass Fiber Tweeter Type: X-ART Tweeter Diaphragm Area: 4 ² / 2420mm ² Mid-Woofer Amplifier: PWM Power RMS / Music: 50W / 75W Tweeter Amplifier: Class A/B Power RMS / Music: 50W / 75W High Shelf EQ > 5 kHz: ±6 dB Low Shelf EQ < 300 kHz: ±6 dB Tweeter Gain: ±4 dB Input Connectors: XLR / RCA Input Impedance: 30 KOhm Magnetically Shielded: No Dimensions (H x W x D): 11 x 6.5 x 8.5 / 280mm x 170mm x 220mm Adam Recording-and-Computers MRA

More Information and order online::
Adam A5X Active Studio Monitor Single

ADAM F7 Active Studio Monitor Single – Nearly New

ADAM F7 Active Studio Monitor Single - Nearly New
The A7X in the AX series is ADAM Audio?s most popular model. With the F7 we proudly present a brand new speaker with the same dimensions and a similar sound quality but at a new lower price point. Please note this item was returned unwanted from a customer. The original boxing is scuffed and all the seals are broken. Otherwise the unit itself looks and operates as new and has only been used a couple of times.

The F7 features ADAM Audios proprietary Accelerating Ribbon Technology the most famous of all ADAM inventions assuring for utmost clarity of the high frequencies. The 7″ carbon/paper-midwoofer comes with a 37mm voice coil. It has been designed to perfectly complement the ART tweeter. It stars in both the deep registers and the musically crucial midrange. Built in controls include a volume knob (-8 to +6dB) and two room EQs for both the high (>5kHz) and the low (5kHz) and the low ( Adam Recording-and-Computers 10D7

More Information and order online::
ADAM F7 Active Studio Monitor Single – Nearly New

Adam S3X-H Active Near/Midfield Studio Monitor Single

Adam S3X-H Active Near/Midfield Studio Monitor Single
The Adam S3X-H Studio Monitor features Adams proprietary X-ART tweeter combined with two 7.5 woofers a 4.5 midrange driver three PWM amplifiers and an A/B amplifier. Perfectly designed for medium-sized and larger studios with longer listening distances whilst still providing well-balanced and supremely detailed sound; the S3X-H monitors deliver an impressive maximum SPL of over 126dB per pair and come equipped with extensive controls that include tweeter gain and high/low shelf EQ.

S3X-H Studio Monitor A step up over the smaller models the S3X-H is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio the S3X-H reveals even the finest nuances of any material. The driver assembly of the S3X-H allows long non-fatiguing listening sessions. Powerful Amplifiers and HexaCone Woofers The high-performance PWM amplifiers drive the woofers and midrange in all SX series monitors while a specially developed low-noise 50W amplifier with a flat frequency response up to 300kHz drives the X-ART tweeter. The cones in SX monitors are made from HexaCone an aramid-plastic core with honeycomb structured coated with Kevlar on both sides. This construction ensures maximum strength whilst remaining lightweight this results in a superior dynamic response with self-resonances of the diaphragm eliminated from the audible range. By combining HexaCone woofers with an X-ART tweeter and PWM amplifiers these monitors deliver an outstanding dynamic performance and high sound pressure levels with sonic benefits in the treble range. Extensive Controls The front panel features several controls that are perfect for adapting your monitor setup for any application. The input sensitivity can be adjusted by two controls one changes the coarse settings (-20dB to +8dB) while the second can be used for fine tuning in 0.5dB steps ranging from -1.5dB to +2.0dB. Both the high and low shelf fitlers provide the ability to raise or lower ±4dB progressively within their frequency band. The front panel is also equipped with tweeter gain controls and two LEDs that indicate clipping status. Specifications Frequency Response: 32Hz – 50kHz Maximum SPL @ 1m: >126dB Crossover Frequency: 350Hz / 2800Hz Woofer Size: 7.5 / 186mm Woofer Voice Coil: 2 / 50mm Midrange Size: 4.5 / 116mm Midrange Voice Coil: 1 / 25mm Midrange & Woofer Cone Material: HexaCone Tweeter Type: X-ART Tweeter Diaphragm: 4² / 2420mm² Woofer Amplifier: 2 x PWM Power RMS / Music: 2 x 250W / 350W Mid-Range Amplifier: PWM Power RMS / Music: 250W / 350W Tweeter Amplifier: A/B Power RMS / Music: 50W / 100W High Shelf EQ >6 kHz: ± 4dB (1dB Steps) Low Shelf EQ < 150 kHz: ± 4dB (1dB Steps) EQ 80Hz: 0 to +6dB (1dB Steps) Tweeter Gain: ± 2dB (0.5dB Steps) Input Sensitivity (Coarse): -20dB - +8dB (4dB Steps) Input Sensitivity (Fine): -1.5dB - +2dB (0.5dB Steps) Input Connectors: XLR Input Impedance: 10 KOhm Magnetically Shielded: No Dimensions (H x W x D): 11 x 21 x 12.50 / 280mm x 530mm x 320mm Weight: 19.6kg / 43.2lb Adam Recording-and-Computers ASR

More Information and order online::
Adam S3X-H Active Near/Midfield Studio Monitor Single

Adam S3X-H Active Near/Midfield Monitors with Stands (Pair)

Adam S3X-H Active Near/Midfield Monitors with Stands (Pair)
The Adam S3X-H Studio Monitor features Adams proprietary X-ART tweeter combined with two 7.5 woofers a 4.5 midrange driver three PWM amplifiers and an A/B amplifier. Perfectly designed for medium-sized and larger studios with longer listening distances whilst still providing well-balanced and supremely detailed sound; the S3X-H monitors deliver an impressive maximum SPL of over 126dB per pair and come equipped with extensive controls that include tweeter gain and high/low shelf EQ. This bundle includes a pair of Adam S3X-H professional nearfield studio monitors and a pair of Gear4music deluxe monitor stands.

S3X-H Studio Monitor A step up over the smaller models the S3X-H is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio the S3X-H reveals even the finest nuances of any material. The driver assembly of the S3X-H allows long non-fatiguing listening sessions. Powerful Amplifiers and HexaCone Woofers The high-performance PWM amplifiers drive the woofers and midrange in all SX series monitors while a specially developed low-noise 50W amplifier with a flat frequency response up to 300kHz drives the X-ART tweeter. The cones in SX monitors are made from HexaCone an aramid-plastic core with honeycomb structured coated with Kevlar on both sides. This construction ensures maximum strength whilst remaining lightweight this results in a superior dynamic response with self-resonances of the diaphragm eliminated from the audible range. By combining HexaCone woofers with an X-ART tweeter and PWM amplifiers these monitors deliver an outstanding dynamic performance and high sound pressure levels with sonic benefits in the treble range. Extensive Controls The front panel features several controls that are perfect for adapting your monitor setup for any application. The input sensitivity can be adjusted by two controls one changes the coarse settings (-20dB to +8dB) while the second can be used for fine tuning in 0.5dB steps ranging from -1.5dB to +2.0dB. Both the high and low shelf fitlers provide the ability to raise or lower ±4dB progressively within their frequency band. The front panel is also equipped with tweeter gain controls and two LEDs that indicate clipping status. Specifications Frequency Response: 32Hz – 50kHz Maximum SPL @ 1m: >126dB Crossover Frequency: 350Hz / 2800Hz Woofer Size: 7.5 / 186mm Woofer Voice Coil: 2 / 50mm Midrange Size: 4.5 / 116mm Midrange Voice Coil: 1 / 25mm Midrange & Woofer Cone Material: HexaCone Tweeter Type: X-ART Tweeter Diaphragm: 4² / 2420mm² Woofer Amplifier: 2 x PWM Power RMS / Music: 2 x 250W / 350W Mid-Range Amplifier: PWM Power RMS / Music: 250W / 350W Tweeter Amplifier: A/B Power RMS / Music: 50W / 100W High Shelf EQ >6 kHz: ± 4dB (1dB Steps) Low Shelf EQ < 150 kHz: ± 4dB (1dB Steps) EQ 80Hz: 0 to +6dB (1dB Steps) Tweeter Gain: ± 2dB (0.5dB Steps) Input Sensitivity (Coarse): -20dB - +8dB (4dB Steps) Input Sensitivity (Fine): -1.5dB - +2dB (0.5dB Steps) Input Connectors: XLR Input Impedance: 10 KOhm Magnetically Shielded: No Dimensions (H x W x D): 11 x 21 x 12.50 / 280mm x 530mm x 320mm Weight: 19.6kg / 43.2lb Adam Recording-and-Computers 1C0Z

More Information and order online::
Adam S3X-H Active Near/Midfield Monitors with Stands (Pair)

Adam F5 Active Studio Monitor Single

Adam F5 Active Studio Monitor Single
The Adam F5 Studio Monitor is driven by two Class A/B amplifiers that provide vibrant and deep bass with a maximum SPL of 106dB per pair. The F5 monitor features a broad frequency range of 52Hz to 50kHz comprehensive controls and a Room Equalizer for high (> 5kHz) and low (< 300Hz) frequencies as well as an overall volume control. Complete with a high pass filter for use with a subwoofer and XLR/TRS/RCA inputs these professional monitors can easily and accurately reproduce dynamically challenging tracks. F Series by Adam The F Series monitors were designed for music lovers musicians sound engineers and producers alike. Focusing on the main elements of any professional monitor Adam focuses on precise and natural sound reproduction. The clarity of the handmade X-ART tweeter combined with the powerful bass responses make the F series monitors perfect for a range of demanding applications. Specifications Mid-Woofer Size: 5 / 127mm Mid-Woofer Cone Material: Glass Fibre/Paper Mid-Woofer Voice Coil: 1 / 25mm Tweeter Type: X-ART Tweeter Diaphragm Area: 3&#178 / 1848mm² Amplifier Type: Class A/B Amplifier Power RMS: 50W Frequency Response: 52 Hz – 50 kHz Max SPL @ 1m: >106 dB Crossover Frequency: 2900 Hz High Shelf EQ > 5 kHz: ±6 dB Low Shelf EQ < 300 kHz: ±6 dB Input Connectors: XLR / RCA / TRS Magnetically Shielded: No Dimensions (Height x Width x Depth): 11.5 x 7.5 x 9 / 290mm x 185mm x 230mm Weight: 15lb / 6.8kg Adam Recording-and-Computers JF8

More Information and order online::
Adam F5 Active Studio Monitor Single

Adam A5X Active Studio Monitors with Stands Pair

Adam A5X Active Studio Monitors with Stands Pair
The Adam A5X Studio Monitors feature Adams proprietary X-ART tweeter paired with a 5.5 mid-range woofer an A/B amplifier and a powerful PWM amplifier. Perfectly designed for home and small studio environments; the A5X monitors deliver a maximum SPL of 110dB per pair and come equipped with a tweeter gain function dual front-firing bass ports as well as high shelf/low shelf EQ and flexible input connectors. Boasting crystal-clear and crisp sound reproduction with deep bass responses the qualities of the A5X provide you with a clear picture of the smallest changes in your mix and the sonic results.

Sophisticated Design The AX series monitor cabinets feature chamfered upper corners on the front helping to minimise edge diffraction so that phase cancellation is not an issue. The interior of the cabinet is equipped with a special fleece that prevents the internal resonances being disturbed as well as ensuring superior bass reflex tuning. The front panel houses the power switch volume control and front-firing bass reflex ports providing greater ease of use and allowing the monitor to be placed closer to a wall if needed. The woofers on all AX series monitors are built using a construction of woven carbon and glass fiber with the synthetic material Rohacell. When these three materials are combined together the result is an ultra-lightweight yet extremely rigid material that provides excellent transient responses. A/B and PWM Amplifiers All models in the AX series feature two discrete amplifiers – an A/B that drives the X-ART tweeter and functions quickly within its broad frequency range whilst the mid-range woofer is driven by a powerful and highly efficient pulse-width modulated (PWM) amplifier. By pairing these two together Adam delivers monitors that do not require additional heat sinks and are both more reliable and durable than traditional amplifiers. Stereolink The Stereolink is a useful feature when working on desktop DAWs. The two additional input and output jacks for the second stereo channel allow you to control the volume for both monitors using the control of only one monitor. Unlike the typical master-slave configuration each A5X is fully equipped and can function either as a master or a slave unit. Specifications Frequency Response: 50Hz – 50kHz Maximum SPL @ 1m: >110dB (Per Pair) Crossover Frequency: 2500Hz Mid-Woofer Size: 5.5 / 145mm Mid-Woofer Voice Coil: 1.5 / 32mm Mid-Woofer Cone Material: Carbon/Rohacell/Glass Fiber Tweeter Type: X-ART Tweeter Diaphragm Area: 4 ² / 2420mm ² Mid-Woofer Amplifier: PWM Power RMS / Music: 50W / 75W Tweeter Amplifier: Class A/B Power RMS / Music: 50W / 75W High Shelf EQ > 5 kHz: ±6 dB Low Shelf EQ < 300 kHz: ±6 dB Tweeter Gain: ±4 dB Input Connectors: XLR / RCA Input Impedance: 30 KOhm Magnetically Shielded: No Dimensions (H x W x D): 11 x 6.5 x 8.5 / 280mm x 170mm x 220mm Adam Recording-and-Computers MZ7

More Information and order online::
Adam A5X Active Studio Monitors with Stands Pair

Adam S3X-V Active Near/Midfield Monitor with Stands (Pair)

Adam S3X-V Active Near/Midfield Monitor with Stands (Pair)
The Adam S3X-V Studio Monitor features Adams proprietary X-ART tweeter combined with a 9 woofer and 4.5 midrange speaker two PWM amplifiers and an A/B amplifier. Perfectly designed for longer listening distances whilst still providing well-balanced and supremely detailed sound; the S3X-V monitors deliver an impressive maximum SPL of over 124dB per pair and come equipped with extensive controls that include tweeter gain and high/low shelf EQ. This bundle includes a pair of Adam S3X-V professional nearfield studio monitors and a pair of Gear4music deluxe monitor stands.

S3X-V Studio Monitor A step up over the smaller models the S3X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio the S3X-V reveals even the finest nuances of any material. The driver assembly of the S3X-V allows long non-fatiguing listening sessions. Powerful Amplifiers and HexaCone Woofers The high-performance PWM amplifiers drive the woofers and midrange in all SX series monitors while a specially developed low-noise 50W amplifier with a flat frequency response up to 300kHz drives the X-ART tweeter. The cones in SX monitors are made from HexaCone an aramid-plastic core with honeycomb structured coated with Kevlar on both sides. This construction ensures maximum strength whilst remaining lightweight this results in a superior dynamic response with self-resonances of the diaphragm eliminated from the audible range. By combining HexaCone woofers with an X-ART tweeter and PWM amplifiers these monitors deliver an outstanding dynamic performance and high sound pressure levels with sonic benefits in the treble range. Extensive Controls The front panel features several controls that are perfect for adapting your monitor setup for any application. The input sensitivity can be adjusted by two controls one changes the coarse settings (-20dB to +8dB) while the second can be used for fine tuning in 0.5dB steps ranging from -1.5dB to +2.0dB. Both the high and low shelf fitlers provide the ability to raise or lower ±4dB progressively within their frequency band. The front panel is also equipped with tweeter gain controls and two LEDs that indicate clipping status. Specifications Frequency Response: 32Hz – 50kHz Maximum SPL @ 1m: >124dB Crossover Frequency: 350Hz / 2800Hz Woofer Size: 9 / 228mm Woofer Voice Coil: 2 / 50mm Midrange Size: 4.5 / 116mm Midrange Voice Coil: 1 / 25mm Midrange & Woofer Cone Material: HexaCone Tweeter Type: X-ART Tweeter Diaphragm: 4² / 2420mm² Woofer Amplifier: PWM Power RMS / Music: 250W / 350W Mid-Range Amplifier: PWM Power RMS / Music: 250W / 350W Tweeter Amplifier: A/B Power RMS / Music: 50W / 100W High Shelf EQ >6 kHz: ± 4dB (1dB Steps) Low Shelf EQ < 150 kHz: ± 4dB (1dB Steps) EQ 80Hz: 0 to +6dB (1dB Steps) Tweeter Gain: ± 2dB (0.5dB Steps) Input Sensitivity (Coarse): -20dB - +8dB (4dB Steps) Input Sensitivity (Fine): -1.5dB - +2dB (0.5dB Steps) Input Connectors: XLR Input Impedance: 10 KOhm Magnetically Shielded: No Dimensions (H x W x D): 19 x 11 x 11.5 / 485mm x 281mm x 295mm Weight: 15.4kg / 34lb Adam Recording-and-Computers 1BYW

More Information and order online::
Adam S3X-V Active Near/Midfield Monitor with Stands (Pair)

Adam Sub12 Active Subwoofer 200w

Adam Sub12 Active Subwoofer 200w
The Adam Sub12 is a powerful active subwoofer designed for studio monitoring that delivers a huge 200 watts of authentic and natural sounding bass response. With a frequency response of 22 to 150 Hz phase reverse switch adjustable input and crossover levels and large 12 inch woofer the Sub12 is a perfect companion to a range of studio monitors with XLR or RCA connectivity. The Adam Sub12 also incorporates a high pass filter for Dolby® mixing applications and features a PWM low heat operation power amplifier.

Powerful and Accurate Subwoofer Housing a powerful 12 inch woofer with extended cone travel the Sub12 is optimized for accurate bass reproduction and delivers impressive projection due to the down firing bass reflex port. Powered by a low heat operation PWM amplifier the Sub12 delivers powerful bass tones with a frequency response of 22 Hz to 150 Hz and maximum output of 200 watts. Advanced Controls Located on the rear of the Sub12 are two rotary controls which can be used to adjust the input level and crossover frequency to optimize the Sub12 to your required needs and environment. The Sub12 also incorporates a 85Hz high pass filter switch and phase reverse switch to provide maximum integration into a range of set ups as the high pass filter optimises the satellite speaker output to meet the Dolby® theatre sound requirements. Specifications Speaker Type: Subwoofer Speaker Size: 12″ Voice Coil: 2″ Cone Material: Paper Output Power: 200W Input Connections: 2 x XLR 1x RCA (Stereo) Output Connections: 3 x XLR 1 x RCA (Stereo) Frequency Response: 22 Hz – 150 Hz THD > 60 Hz: 115 dB Crossover Frequencies: 50 – 150 Hz Input Impedance: 10 K Ohms Includes: Power Chord Manual Height: 23.5″ / 600 mm Width: 14″ / 360 mm Depth: 17.5″ / 450mm Weight: 26 Kg Adam Recording-and-Computers 1C32

More Information and order online::
Adam Sub12 Active Subwoofer 200w

Adam Sub2100 Active Subwoofer 1000w

Adam Sub2100 Active Subwoofer 1000w
The Adam Sub2100 is a powerful active subwoofer designed for studio monitoring that delivers a huge 1000 watts of authentic and natural sounding bass response. With a frequency response of 18 to 150 Hz phase reverse switch adjustable input and crossover levels and large 21.5 inch woofer the Sub2100 is a perfect companion to a range of studio monitors with XLR or RCA connectivity. The Adam Sub2100 also incorporates a high pass filter for Dolby® mixing applications and features an efficient and low heat operation power amplifier.

Powerful and Accurate Subwoofer Housing a powerful 15.5 inch woofer with extended cone travel the Sub15 is optimized for accurate bass reproduction and delivers low and extensive response due to the aluminium cone driven by two powerful magnets and 100mm voice coil. Powered by a low heat operation PWM amplifier the Sub15 delivers powerful bass tones with a frequency response of 20 Hz to 150 Hz and maximum output of 1000 watts. Advanced Controls Located on the rear of the Sub15 are two rotary controls which can be used to adjust the input level and crossover frequency to optimize the Sub15 to your required needs and environment. The Sub15 also incorporates a 85Hz high pass filter switch and phase reverse switch to provide maximum integration into a range of set ups as the high pass filter optimises the satellite speaker output to meet the Dolby® theatre sound requirements. Specifications Speaker Type: Subwoofer Speaker Size: 15.5″ Voice Coil: 4″ Cone Material: Aluminium Output Power: 1000W Input Connections: 2 x XLR 1x RCA (Stereo) Output Connections: 3 x XLR 1 x RCA (Stereo) Frequency Response: 20 Hz – 150 Hz SPL (Max): > 120 dB Crossover Frequencies: 50 – 150 Hz Includes: Power Chord Manual Height: 25″ / 635 mm Width: 18.5″ / 470 mm Depth: 20.5″ / 525 mm Weight: 52 Kg Adam Recording-and-Computers 1C34

More Information and order online::
Adam Sub2100 Active Subwoofer 1000w